PUK Hydroeclipse IP65
A new range of outdoor wall-mounted appliques, including ten different models of round, square and rectangular shapes.
Used mainly for decoration of outdoor areas, once switched on the Hydroeclipse range creates a beautiful luminous halo, discrete and elegant, that highlights the wall texture.
With a depth of just 33mm and surface-mounted, the most representative shape is the round luminaire, that seems to recreate a lunar eclipse effect.
Concord Beacon Muse XL
The Concord Beacon Muse XL provides total control and adjustability of both beam angle and light levels combined with typical Ra97 colour rendering, offering a truly flexible product for gallery and display applications. The Beacon Muse XL features intelligent LED technology and ancient lens principles to create a fully adjustable spotlight. Boasting an increased output over the original Beacon Muse, the luminaire provides a flexible, high quality solution. The beam angle can be adjusted from ten to 70-degrees as well providing a dimmable range between 5-100%.
SGM P-10
The SGM P-10 low-profile, yet extremely powerful, full colour LED luminaire carries the functionalities of a washlight, a strobe light, a floodlight, a pixel light, and a blinder with a non-fading continuous output. It incorporates 48 high-power RGBW 24W LEDs with eight individually controllable segments and a staggering output of 40,000 lumens. With all this crossover technology combined in one single luminaire, SGM’s P-10 is truly the perfect multi-purpose LED fixture and a solid long-term investment.
Radiant Lighting 3D LED Flex 40 IP65 System
The 3D LED Flex 40 IP65 System is a three-dimensionally flexible, high power, modular, linear LED lighting system, incorporating a patented articulated ball-joint system between the heatsink modules, allowing it to follow building surfaces that are non-linear with curved profiles and façades.
Each 100mm module incorporates four Luxeon Z red LEDs, a highly efficient 8-degree Gaggione lens, and custom anti-glare snoots. Each module is individually addressable via DMX.
Nexo Luce OVO 18UN
OVO 18UN by Nexo Luce is designed to create a dramatic ultra-narrow light beam on façades and architectural surfaces. It is equipped with 3.5-inch optics for accurate projection while able to reach up to 59lux at 80-metres distance. This LED projector has an adjustable beam position; aluminium and stainless steel body AISI 316L; and is suitable for outdoor installations thanks to IP65 waterproof protection and thermal shock-resistant tempered safety glass.
Targetti ZENO NSP
ZENO NSP is the first projector in the Targetti portfolio equipped with the Narrow Spot optic system, developed to create a defined and precise beam. ZENO NSP is suitable for museum or retail lighting where a perfect visibility and illumination is needed.
The NSP optic works by reflection: the lamp is hidden from sight and aimed towards the parabolic reflector, which collimates the beam and emits a particularly defined cone of light.
The discrete and elegant design of the product makes it able to perfectly integrate in every environment.
Zumtobel TRINOS
The TRINOS industrial LED luminaire combines the flexibility and functionality of a trunking system with the durability of an IP65 solution. As a result, precise and high-quality work is supported in locations that demand higher protection against moisture and dust.
A three-piece sealing concept ensures the highest levels of resistance, safety and performance at all times. The proven split-lens technology from the TECTON C portfolio is also used in the TRINOS luminaires, which are protected from contamination and moisture from above, below and at both ends.
Cooledge TILE Exterior
Imagine the infinite design possibilities to create and build with light. Cooledge’s TILE Exterior frees light from the constraints of fixtures to illuminate any architectural geometry, scale with ease, and give designers entirely new ways to accentuate buildings. Unlike traditional light sources such as standard wash, flood or grazing applications used to light buildings, TILE Exterior’s IP65 rated system sets uniquely new standards for outdoor applications to enable whole building façades, canopies and entrance-ways to come to life with light.
Precision Lighting Single Source series
Precision Lighting have taken the Retro, Evo and Microspot and given them a healthy injection of new light engines, impressive optics and neat modifications. The Single Source series has been developed specifically to replicate the best characteristics of a halogen light source whilst maintaining the efficacy improvements from LED. The single TIR optic light engines produce clean, crisp shadows, with high peak intensities down to a six-degree beam angle. Each family is available in two output packages of 405 and 700 delivered lumens.
Remote Controlled Lighting DRX5
With a cut out of just 145mm, DRX5 is also small behind the scenes so it’s suitable for low ceiling voids. A variety of powerful beams enables pin spotting or flooding without breaking the ceiling line. The four-degree beam is the most precise option of its kind, even when positioned on grand high ceilings. DRX5-S offers wider options, all of which are single optics. All have motorised, remote controlled full 360-degree pan and 35-degree tilt and are compatible with DALI, DMX and RCL’s award winning iDirect app.
Mike Stoane Lighting STX2.50.BLE
Mike Stoane Lighting’s smallest Xicato-based spotlight at Ø50mm, the STX2.50.BLE accepts XTM and the XIM in numerous variants. Optics are easily interchangeable, and there is provision for further accessories including new framing projector.
Its BLE capability opens up a wealth of control options, as well as the expected deep and smooth flicker-free dimming. MSL are seeing this and others in the family used for intelligent lighting applications that enhance the user experience, can be used in intelligent art work conservation scenarios and all without the need for costly and complicated wired control system installations.
Lightgraphix LD95
The LD95 is a miniature floor or ceiling mounted LED spotlight, designed for applications where a recessed fitting cannot be installed. Designed to blend into its surroundings, it features a deep recessed LED and optional glare shield, removing the need for a large cowl. Using the latest in LED technology, with a typical 93 CRI in 3000K warm white, the LD95 offers an excellent diffused beam shape from a range of optics. The LD95 incorporates an integral anti-wicking barrier for added protection.
